Syringe Pump
Our product range includes a wide range of aspire syringe pump and sp-810 syringe infusion pump.Aspire Syringe Pump
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model | Aspire |
| Battery Type | Rechargeable Ni-Mh, 8.4V, 2.1 Ah |
| Power Source | 110/220 VAC +/-10%, 50/60Hz |
| Power Consumption | 15 VA max |
| Syringe Size | 10, 20, 30, 50 ml |
| Brand | Plenumtek |
| Pumping Mechanism | Lead screw mechanism |
| Atmospheric Pressure | 70 to 106 kPa |
| Relative Humidity | 20 to 90 % (no condensation) |
| Ambient Temperature | 05 Degree to 40 Degree C |
| Communication Port | RS 232C |
| Syringe Acceptability | Dispovan, BD Precise, Plastipak, BBraun Perfusor (Provision to add two more brands) |
| Mechanical accuracy | +/- 1% |
| Overall Accuracy | +/-2% (Measured time Greater than 1hr, min 0.2 ml, excluding syringe tolerances) |
| Fuse | 1.2A |
| Battery Operations | Less than 10 Hrs @ 5ml/hr flow Rate for 50ml Syringe |
| Battery Recharging | 16 Hrs for full charging |
Features
Front loading of syringe
Auto syringe size detection
Manual Clutch release mechanism for quick operation
Bolus and Purge facility with settable bolus volume
Self illustrative control panel with high bright 7 segments LED display
Facility to save default Syringe brand, Size, Flow rate to minimize start up time
Greater range of rate selection within the resolution of 0.1 ml/hr
Separate battery compartment for easy external replacement
Rechargeable Ni-MH battery pack for increased battery life
Separate smps compartment for easy external replacement of power supply in case of failure
Splash proof ABS enclosure
Facility for external software up-gradation via RS232 port
Facility for Electrical stacking Multiple inputs AC Cord for up to 8 Pumps
Top mounted collapsible handle for easy portability during transportation
Holder for proper positioning of patient line
Suitable for table top or bed side pole mounting
Technical Specifications
Occlusion Pressure Limits Programmable three levels
Low 0.4 +/0.08 Kg/cm2 (bar) equivalent to 300 mmHg
Medium 0.8 +/0.20 Kg/cm2 (bar) equivalent to 600 mmHg
High 1.2 +/0.25 Kg/cm2 (bar) equivalent to 900 mmHg
Alarm
Low Battery
KVO/KOR
Drive Disengaged
Very Low Battery
Occlusion
AC Power Failure
Near End
Syringe Dislocated
System Error
End of Infusion
Standby/ Idle
Syringe empty
Other Details
Normal Flow Rate RangeBolus Flow rate RangeSyringe CapacityFlow RateSyringe CapacityFlow Rate10ml0.1-300.0 ml10ml300ml20ml0.1-500.0 ml20ml500ml30ml0.1-700.0 ml30ml700ml50/60ml0.1-999.9 ml10ml1000 ml/hr(1200 ml/hr, optional
Classification
Class IIB, Type BF as per IEC 60601-1-2 & IEC 60601-2-24
IP24 as per IEC 60529 (Splash Proof)
Optional accessories
RS 232C Cable for software up-gradation
Multiple inputs AC Cord for up to 8 Pumps for electrical stacking
Standard Accessories
Unit with IV Pole Mounting Device, Operating Manual
Housing & Construction
Housing Material ABS Plastics
Weight Approx. 2.3 Kg Approx
Dimensions Approx. 272 (L) X 150 (W) X 135 (H)
Mounting On a pole or a bed-frame
Callback
SP-810 Syringe Infusion Pump
Product Details:
| Minimum Order Quantity | 1 Piece |
| Dimension | 280mmx210mmx130mm |
| Kvo Speed | 1ml/h |
| Injection Accuracy | Within +/-3%(accuracy after syringe is installed) |
| Pump Mechanical Accuracy | Within +/-2% |
| Volume Limit Range | 0.1ml-999.9ml(increment of 0.1 ml/h) |
| Injection Volume Done | 9999ml(increment of 0.1 ml/h) |
| Power Consumption | 30VA |
| Weight | 2.2 kg |
| Syringe | Compatible with any brand |
| Model | SP-810 |
Characteristics of Three Vein Infusion Models
- Time-Volume Mode By setting the time and injection volume, the system does the injection after automatic speed calculation.
- Dosage Weight Modeby setting the volume, weight, medicament, dosage, the system does the injection after automatic speed calculation.
- Esay Speed-Setting Modethe normal one hospitals used.
Other Characteristics
- Function to remove bubbles in the tube fast.
- Function to handle fast speed and large volume(bolus)
- The system automatically opens up KVO after injection(reopens vein circulation)
- Function to Preset Solution Volume The user can preset solution volume.The machine will automatically stop and start KVO function once the preset solution volume is finished.
- The machine automatically records the settings for last injection. It greatly reduces the workload for users.
- Function to Auto-Define a Syringe Complete calibration technology for syringe brand definition that ensures the compatibility of any syringe brand and injection accuracy.
Features
- Freely Stackable You freely stack one onto another to provide multiple solutions, combination solutions that have a wide range of clinical applications.
- Three Power Source AC220 50Hz, Internal Battery, 12V car charge
- Digital LCD display High capacity words, friendly user interface, dynamically display working status.
- Positive and Negative Shuttle Debugger Can freely regulate parameters.
- Mechanism Advantage of Push-Pull Rod Applicable to all domestic brands and all kinds of syringes and Operable with one hand in a No-Germ environment
Other Technical Details
| Injection Speed | 50(60)ml Syringe 0.1 ml/h - (increment of 0.1 ml/h) |
| 30ml Syringe 0.1ml/h - 900ml/h(increment of 0.1 ml/h) | |
| 20ml Syringe 0.1ml/h - 600ml/h(increment of 0.1ml/h) | |
| 10ml Syringe 0.1ml/h - 300ml/h(increment of 0.1ml/h) | |
| High Speed Plunge | 50(60)ml Syringe 1500ml/h |
| 30ml Syringe 900ml/h | |
| 20ml Syringe 600ml/h | |
| 10ml Syringe 300ml/h | |
| Blockage Alarm Triggering Pressure Levels | High 800mm Hg+-200mm Hg (106.7kPa +- 26.7kPa) |
| Medium 500mm Hg +-100mmHg(66.7kPa+-13.3kPa) | |
| Low 300mm Hg +- 100 mmHg (40.7 kPa +- 13.3 kPa) | |
| Alarm Type | Solutionis almost done Injection is finished, Preset Volume Injection is done Injection blockage Syringe Off Syringe unporper installation, Wrong injection Speed, AC unplugged, Battery is running out. |
Callback